|
|
|
|
Shipping time may vary. Please contact us about current delivery time
AE-Series, Crystal Clear Collector
Since its introduction in 1987 the AET AE-Series has set a new
standard in solar thermal collector excellence. Available in a wide
range of sizes and models the AE collectors offer excellent performance
and structural integrity. AE-Series collectors have been successfully
utilized in all facets of residential, commercial and industrial
applications.
- Glazing : 1 sheet of solite glass, 1/8” or 5/32” thick with 0.01% iron oxide content. Transmittance: 91.0%
- Glazing Gasket: EPDM Channel with molded corners.
- AE Collector
- Insulation: 1-¼” Foil-faced poly-isocyanurate board insulation.
(R-10). ¾” Foil-faced poly-isocyanurate board in side walls and under
headers. (R-6).
- Frame Wall and Batten: 6063 T6 Aluminum extrusion. (1/8” wall)
Electrostatic paint finish. Electrostatic paint integral mounting
system.
- Backsheet: 0.019 stucco embossed aluminum sheet MB-40 bronze, pop-riveted to frame wall.
- Absorber Plate: Exclusively manufactured by Thermafin
Manufacturing. All copper fin and tube construction. High frequency
forge welded for permanent bond between tube and sheet. No soldered or
crimped joints to fair from expansion and contraction. 30 year warranty
on fin-to-tube joint.
- Absorber Coating: Crystal Clear Absorptivity: ~ 0.97 Emissivity: ~ 0.07
- Individually Leak Tested At: 125 PSI
- Design Life: 30 Years
- Flow Rate: 0.5 to 1.8 GPM recommended
- Warranty: 10 year limited – Consult Factory
AET Solar Collectors CODE APPROVALS
- California Energy Commission (TIPSE) 1981
- Florida Solar Energy Center (FSEC) 1981
- Arizona Solar Energy Commission (AEL) 1981
- Tennessee Valley Authority (TVA) 1981
- International Association of Plumbing and Mechanical
|
|
|
|
|
|
|
|
|